Stucco and EIFS
Stucco and EIFS systems have the ability for added aesthetic appeal than other siding options with added architectural décor and moldings, but if installed in the wrong manner, it can result in health issues for people in the home. One of the most common problems of EIFS is wrong installation of the wood trim surrounding windows and doors, which leaves cracks for moisture and water to penetrate through them resulting in growth of mold and deterioration of the wood framing and sheathing. The most unfortunate truth of these situations is that many home owners do not have the awareness that there is a situation until when someone in the home starts becoming sick and goes to see the doctor or when rot starts appearing.
In worse cases, stucco and EIFS from Calgary concrete underlayment service & solutions will completely cover the issue until when the pieces of the home starts falling apart. At the end of it all, you have the risk of spending a lot of money on eliminating the old substrate, replacing it, and possibly doing a full replacement of the siding.
Newfangled Materials for stucco and EIFS
Newfangled materials are on the scene for stucco and EIFS specifically which lead to avoiding the problem of cracks fully for which water penetrate, but will go a further step to divert water from the windows and doors entirely. Moldings of architecture use similar materials made of stucco and EIFS, which are inert organically and do not support the growth of mold. They get applied directly on the EIFS siding, which leaves no path to the substrate for moisture. Additionally, due to ways in which they are manufactured, they can get designed with appealing profiles and kick water from the wall in a similar way to flashing.
Stucco and EIFS architectural moldings utilize the Styrofoam core that is cut to a design you desire put on your home, followed with fiberglass mesh for additional flexibility and one or two coats of the cementitious basecoat. This leaves moldings stronger than the wall itself and finished in a way that gets painted by use of exterior-grade masonry paints.
The final result in the option of using these moldings over the traditional wood trim is the more continuous siding that will protect better what is holding the roof over the head. The moldings have great aesthetic appeal and the prices are more competitive, and when time for selling your house comes, you will settle the fears of the buyers.
Also, lime will be use with water and sand to make Stucco and EIFS. As lime is soluble, the mixture possesses a tendency that is self-healing. Presently, stucco is from Portland cement, water, and sand which results in a brittle and hard variety.
How to install coat Stucco?
To install coat stucco that is hard, the first substrate gets install follow by the metal lath and a coat of stucco gets apply with the trowel. It is then giving time to set and then an application of another coating is finish. The process involves a brown coat, a scratch coat, and a finish coat.
You can apply stucco and EIFS on a wire and paper. The coat needs to be thicker. The leading coat covers the wire. It has to be scratch immediately after setting. The brown coat will get bond on the first coat and the finish coat is then apply on the outer layer.
Stucco and EIFS are mechanically attach or glue to the substrate and are compose of three main layers. The internal layer, which is mostly from polystyrene material, is an insulation board from foam. The other layer is the base coating that gets attach to the fiberglass mesh and a final layer is the finish color coat. It is populous because of easy installation, better insulation, and low cost properties. The only con is absorption of moisture that results in the damage of the building.
Variety of paints for stucco and EIFS
There is a variety of paints for stucco and EIFS. Colorants are pigments that are inorganic and can adapt with high values of pH for cement. They can be natural like natural earths and ochers or artificial like iron oxides that are manmade. Natural colorants stay unaffected with UV rays and are more pleasant to the eye. However, the tinting strength and range of shades is less as compared to manufactured colors. Colors that are manmade, conversely, provide a wide array of shades like blue hues and greens plus earth tones like reds, brown, and yellow. They have UV stability due to inorganic pigments being present.